HOST ACCESS | INSTALL

Installation of Host Access is very straight forward, please follow these instructions

Insert CD media into your DVD or CD drive.

(Version 7.20)
Installation screen should automatically appear, select 32bit Version.

or

(Version 7.30 and upwards)
At Welcome Page - click next

Enter your Name and Organisation, the Serial number will show 30 Day Evaluation Copy.

If this is a re-installation, enter your Serial Number as supplied by TAS (i.e. wcr83******nrp9) - this will be onsite. (If this is a new additional install it will need to be ordered and issued by TAS).

Once Serial Number is entered - click next

At Destination Folder - click next
Typical install
Click next again to Install.

Once installed - Launch Host Access.

Network is Windows Sockets
Emulation is WYSE WY-60
Click Properties
TCP/IP settings - Host (enter TOPIC Server IP) and Apply.

Save Session as TOPIC.

You have now successfully installed Host Access.

NB: Host Access is the preferred terminal emulation software choosen by TAS. We do not support
or recommend any other terminal emulation software!

Host Access is purchased through TAS at a cost of £299+VAT.

If you do not find your answer and need further assistance please click here support@tas-solutions.co.uk or call our technical support team on +44 (0)1621 857785.

TOPIC | FAQ's